Dongguan injection molding RFQ contact
Contact Plastic Make Co for Injection Molding RFQ
Send drawings, CAD files, material notes, quantity, finish, tolerance requirements, and destination details for custom plastic injection molding, mold making, T1 samples, production, inspection, and export support.
RFQ preparation
What to Send With an Injection Molding RFQ
A clear RFQ helps us review the molding route, tooling questions, part risk, and quotation scope faster. If some details are not ready, send the available information first and mark what still needs discussion.
| RFQ detail | Useful information | Why it matters |
|---|---|---|
| 3D CAD and 2D drawings | STEP, STP, IGS, X_T, PDF, DWG, or marked screenshots. | Shows part geometry, critical dimensions, draft, wall thickness, ribs, bosses, and assembly interfaces. |
| Material or application | Target resin, similar material, temperature, strength, flexibility, appearance, or use environment. | Material affects shrinkage, tolerance, surface finish, tooling review, and molding risk. |
| Quantity and stage | Prototype, T1 sample review, pilot batch, low volume order, or repeat production. | The stage affects tooling plan, sample review, inspection focus, and production quotation. |
| Color, finish, and appearance | Color target, texture, polish, visible surfaces, logo, assembly fit, or packaging needs. | Cosmetic requirements influence mold finish, gate location, sample approval, and inspection notes. |
| Critical dimensions and tolerance | Mark screw bosses, clips, seals, insert positions, snap fits, datum surfaces, and mating part areas. | Functional dimensions need different review than general reference dimensions. |
| Destination and delivery notes | Destination country, shipment preference, packaging requirement, and any inspection documents needed. | Export packing and shipment details help avoid missing cost or handling assumptions. |
Project review
Contact Us When Your Plastic Part Needs Manufacturing Review
Plastic Make Co supports custom plastic parts from early DFM questions through mold making, T1 sample feedback, production molding, secondary finishing, inspection, packaging, and export shipment support.
For unfinished designs, send the current CAD, drawing, photo, or sketch with the application and target quantity. The first review can identify missing information before a full quotation is prepared.
Send the part model, drawing, material, quantity, color, finish, and delivery destination.
Explain the current issue, existing tool status, part defects, and what needs to change.
Share sample photos, measurement notes, fit problems, cosmetic concerns, and correction priorities.
Clarify first batch quantity, future demand expectation, approval plan, and inspection requirements.
How the RFQ moves
What Happens After You Contact Plastic Make Co
We review the files, material, quantity, surface, tolerance, and destination notes you send.
If key details are missing, we ask about wall thickness, draft, gate marks, critical fit, inserts, or finish.
The quotation scope may include mold making, T1 samples, molded parts, finishing, assembly, inspection, and export packing.
For active projects, sample review and production checks are handled according to the approved requirements.
Useful next reads
Prepare a Stronger Injection Molding Inquiry
These buyer guides help you clarify material, tolerance, and production-stage questions before sending an RFQ.
- Plastic material selection guide for ABS, PP, PC, nylon, POM, TPE, TPU, and other resin choices.
- Injection molding tolerance guide for critical dimensions, inspection method, and sample review.
- Low volume injection molding for pilot runs, small batches, T1 samples, and staged production.
- DFM for injection molded parts for wall thickness, draft, ribs, bosses, gates, and parting lines.
Contact questions
RFQ Contact FAQ
Can I contact Plastic Make Co before drawings are complete?
Yes. Send the current CAD, sketch, photo, target dimensions, application, material idea, and quantity. We can identify which information is still needed for a more complete quotation.
What file formats are useful for injection molding review?
STEP, STP, IGS, X_T, PDF drawings, DWG drawings, and marked screenshots are useful. If you only have photos or samples, explain the target dimensions and application.
Should I use the quote page, email, or WhatsApp?
Use the quote page or email when you have several files and detailed requirements. WhatsApp is useful for quick clarification, photos, and follow-up messages.
What should I say if the drawings are sensitive?
Mention confidentiality requirements in your first message so the project communication can be handled with the right level of care.
Ready to send your project?
Send drawings for an injection molding quote
For faster review, include CAD files or photos, material, quantity, color, finish, destination country, and any critical fit or appearance requirements.